Thanks for visiting Auto Mechanic Tools. Please remember to bookmark this page Air Angle. If you found what your looking for, then don"t forget to click an appreciation button below for this post.
 New Air Motor 4 holes for Contra Angle Straight Cone Low Speed Handpiece US $21.50 
|
 Angle Drill Air powered Campbell Hausfield US $50.00
|
 New Dental Low Speed E4 Air Motor F Straight Contra Angle Handpiece 4 Hole Sale US $31.35
|
 Auto Car Air Conditioner Right Angle Pipe Joint Fitting 3.1" Length US $4.70
|
 Automotive Air Conditioner Aluminum Angle Type Pipe Joint Fitting US $4.59
|
 NEW 1/4" DR AIR ANGLE HEAD DIE GRINDER POLISHER FREE SHIPPING US $21.99
|
 AIR ANGLE SANDER TADD US $8.27
|
 Neiko 7" Air Angle Sander Grinder 4500 RPM Pneumatic US $89.95
|
 Plastic Handle Metal Angle Nozzle Pistol Air Blow Gun US $9.13
|
 Air Conditioning 4/5" Thread 90 Degree Angle Tube Joint Fitting for Auto US $5.22
|
 E-Type Slow Low Speed Dental Handpiece Straight+Contra+Angle+Air Motor 4-Hole US $99.50
|
 EX Slow Low Speed Dental Handpiece Straight+Contra+Angle+Air Motor 4-Hole E-Type US $89.50
|
 EX Slow Low Speed Dental Handpiece Straight+Contra+Angle+Air Motor 2-Hole E-Type US $85.90
|
 3/5" x 3/5" Female Thread Right Angle Equal Elbow Air Pipe Nipple Connector US $4.64
|
 Metal Angle Nozzle Pistol Trigger Dust Air Blow Gun New US $9.09
|
 Eagle - Air Tool - EGA500 - 1/4" Angle Die Grinder (New in Box) US $59.99
|
 Ingersoll Rand IR302A 1/4 Inch Mini Angle Air Die Grinder US $55.00
|
 90 degree angle Air Jet for Tubless tire US $6.49
|
 2 Inch Tight Spot Air Angle Sander Speedway #7627 US $22.90
|
 SIOUX, KWIK-WAY, SUNNEN 1695 AIR CRAFT VALVE SEAT ANGLE DRIVER. US $450.00
|
 SIOUX, KWIK-WAY, SUNNEN 1690 AIR CRAFT VALVE SEAT ANGLE DRIVER. US $425.00
|
 DOTCO RIGHT ANGLE MINI AIR GRINDER US $89.95
|
 EQUALIZER 240000 PNEUMATIC AIR TOOLS IMPACT WRENCH HAMMER ANGLE auto glass cut A US $24.99
|
 AIR ANGLE DIE GRINDER US $170.00
|
 Beta Tools 1940SDT Sheet Angle Chisel For Air Hammers Items US $23.94
|
 Air Water Pipe 1" x 1" Female Thread Right Angle Equal Elbow Connector US $10.68
|
 Auto Air Condition Aluminum Right Angle Pipe Joint Fittings 3.9" Length US $5.20
|
 Car Air Condition 0.67" Female Thread Right Angle Pipe Joint Fitting US $4.69
|
 Ingersoll Rand Multi-Purpose Air Angle Die Grinder Surface Preparation Kit US $119.06
|
 5 Pcs Pneumatic 4mm Dia Right Angle Air Quick Fittings US $4.58
|
 CP CHICAGO AIR TOOL REVERSIBLE DRILL PNEUMATIC CHUCK ANGLE L US $49.99
|
 Ingersoll Rand IR-7802R 3/8" AIR TOOL REVERSIBLE DRILL PNEUMATIC pistol ANGLE H US $49.99
|
 SUNEX SX-275A AIR HAMMER TOOL IMPACT WRENCH PNEUMATIC RIGHT ANGLE G US $49.99
|
 Ingersoll-Rand 212 3/8" SUPER PNEUMATIC AIR IMPACT WRENCH RIGHT ANGLE E US $49.99
|
 Air Conditioning 7/10" Thread 90 Degree Angle Tube Joint Adapter for Auto US $4.33
|
 NEW INGERSOLL RAND 3445MAX AIR ANGLE GRINDER PNEUMATIC 4 1/2" QUALITY SALE US $206.95
|
 Brass Right Angle Gas Fuel Water Air Tubing 3/5" x 27/64" Hose Barb Elbow Nipple US $8.11
|
 Beta Tools 1931AN10 1/2SD Reversible Air Angle Drill US $267.53
|
 AST-510AHT Astro Pneumatic 3/8"" Right Angle Reversible Air Drill US $104.67
|
 ATD-2130 ATD Tools 1/4"" Mini Angle Air Die Grinder US $60.96
|
 Right Angle Air Sander Sioux 5265 5" US $250.00
|
 RU-1350 Air Filter K&N Univ Oval Straight 2.438" 62mm Angle Flange I.D. 5" High US $45.64
|
 Ingersoll Rand 302A Heavy-Duty Air Angle Die Grinder US $185.70
|
 NEW - Air Angle Grinder - 4.5" wheel - Heavy Duty US $294.85
|
 Air Conditioning 14mm Thread 90 Degree Angle Tube Joint Adapter for Auto US $4.69
|
 1990 Jacksonville FL Naval Air Station Airshow Program NAS Blue Angles US $22.00
|
 Metal 12.2mm Thread Screw Hex Right Angle Air Fitting US $7.89
|
 IR INGERSOLL RAND 3RLN205 1/4" RIGHT ANGLE AIR RATCHET AIRCRAFT TOOL US $129.99
|
 Car Air Conditioner 17mm Female Thread Angle Type Pipe Joint Fitting US $4.36
|
 Securityman Sm-80 Wireless Wide-angle Motion Sensor For Air-alarm System (sm80) US $16.32
|
 New Air Pneumatic ANGLE DIE GRINDER - Air Tool Tools US $17.08
|
 Dynabrade 3" Diameter Right Angle Air Buffer *NEW* US $239.99
|
 BRAND NEW HOFFMAN #40 RADIATOR ANGLE AIR STEAM VENT-VALVE-BOILERS-BURNERS-HEATER US $9.99
|
 BRAND NEW LOT OF 2 STEAM AIR RADIATOR 1/8" ANGLE VENT-VALVE-BOILER-BURNER-HEATER US $9.99
|
 Auto Car Air Conditioner Right Angle Pipe Joint Fitting 2.7" Length US $4.07
|
 NEW Angle Die Grinder Each Air Tools PL1541 045564204006 US $73.98
|
 3/8" Right-Angle Air Drill Reversible AP 510AHT Astro P US $110.80
|
 3/8" Standard Duty Air Angle Reversible Drill IR 7807R US $122.12
|
 NSK Style 2 Push Quick Coupler Handpiece +1 Contra Angle Straight Nose Air Motor US $145.99
|
 Dotco Pneumatic Industrial Vertical Angle air Wheel Grinder Sander 9" 6000 RPM US $169.00
|
 Super Duty Composite Right Angle Air Die Grinder - 1/3 US $164.13
|
 PROFESSIONAL AIR ANGLE GRINDER – GRANITE POLISHER WITH WATER FEED – NEW IN BOX US $69.99
|
 1/4" AIR ANGLE DIE GRINDER CUTTING CLEANING AIR TOOLS US $17.99
|
 Mini Angle 1/4" Air Die Grinder IR 302A BRAND NEW! US $150.74
|
 Heavy Duty Air Angle Polisher/Buffer - 7" Pad IR 314A I US $266.72
|
 Standard Duty Air Angle Die Grinder IR 301 Ingersoll-Ra US $76.19
|
 5 Pcs Pneumatic 8mm Dia Right Angle Air Quick Fittings US $4.78
|
 NSK style dental low slow speed handpiece air turbine latch contra angle nib AA US $.14
|
 Neiko 3/8" Reversible Right Angle Head Air Drill 90 Degree 1900RPM Keyless Chuck US $59.25
|
 IRC-301 Ingersoll Rand Standard-Duty Multi-Purpose Air Angle Die Grinder US $77.32
|
 IRC-301-K Ingersoll Rand Standard-Duty Multi-Purpose Air Angle Die Grinder Kit US $95.61
|
 IRC-7807R Ingersoll Rand 3/8"" Standard-Duty Air Angle Reversible Drill US $120.49
|
 STANLEY A32LA1CT-7 RIGHT ANGLE AIR PNEUMATIC NUT RUNNER NUTRUNNER 3/8" DRIVE, AS US $585.00
|
 TIRE INFLATOR DUAL ANGLE AIR CHUCK W/ GAUGE PLUS FREE US $19.99
|
 Hitachi 15 gauge angle Finish nailer NT65MA4 nail gun with air duster & warranty US $109.99
|
 Pneumatic Air Vertical Angle Grinder NPK NAG-40A US $129.99
|
 Auto Air Condition Aluminum 18mm Thread Right Angle Pipe Joint Fittings US $4.93
|
 Car Air Conditioner 21mm Female Thread Angle Type Pipe Joint Fitting US $5.64
|
 4" AIR ANGLE GRINDER TADD US $.99
|
 New 1/4" Air Angle Die Grinder (6mm) pneumatic tool US $24.46
|
 Sunex SXC606 2" Angle Air Grinder with Comfort Grip US $92.00
|
 NEW angle die grinder air tools US $40.99
|
 DENTAL HIGH-SPEED HANDPIECE LOW CONTRA ANGLE AIR MOTOR US $126.35
|
 2" Mini Orbital Air Sander With 90 Degree Angle For Tight Work Areas US $42.99
|
 Axis & Allies Miniatures Air Force Angles 20 Starter US $37.95
|
 Ingersoll Rand Standard Duty Multi Purpose Air Angle Die Grinder US $69.04
|
 Dotco - Cooper Air Tool 90 Degree Angle Drill US $275.00
|
 2" Air Angle Grinder CPT7500 US $142.75
|
Air Angle
Air Curtains by Canadian Air Systems
Air curtains are widely accepted across North America and Europe as a standard fitment in public buildings, retail stores and industrial applications such as coolers, freezers and cold storage facilities. Air curtains are generally associated with retaining heat energy in cold climates, and the energy savings are substantial.
In the retail environment, research has shown that an open door increases trade by up to 40% as it is an invitation to come in and shop yet retail stores and supermarket air-conditioning systems are 'energy-hungry' so it would therefore seem logical to save as much of the cold air as possible, considering the cost to make it cold in the first place. Public buildings, like airports and convention centres, which have high demand air-conditioning systems need to have open doors to allow access and, while some facilities have motion detector-activated sliding doors, usually of glass, this solution is costly, thermally not very efficient and generally just a way of reducing draughts.
The idea of having an invisible barrier across the doorway to enable unimpeded access yet effectively prevent temperature flow, dust, odours and insects to cross, is appealing in itself but add to this the cost-saving in reducing energy use and the idea becomes more compelling, especially as air curtains are relatively inexpensive items.
Appropriate for industrial applications
Keeping warm air out of insulated cold stores or refrigerated facilities is the Number 1 objective yet a mockery is made of this premise when freezer of chiller doors are left wide open and, in some cases, chocked open to facilitate the movement or storage of perishables.
Properly installed air curtains cut cold air loss and reduce humidity, thus reducing the load on refrigeration or air-conditioning plant and thereby saving energy by reducing compressor running time, maintenance, gas and recharging intervals. These units are an alternative to fast-acting roller doors and PVC slat curtains, and can be situated above or to the side of industrial doorways to create a powerful seal across the opening, keeping cold air in while providing complete visibility and access. This means that forklift drivers don't have to get out of their cabs to open and close doors so that moving from one area to another is a lot easier and productive. Unlike plastic slat curtains, which quickly become opaque with use, an air curtain provides 100% visibility at all times. Units have been installed in loading bays, factories, hangars and production facilities, such as food processing and pharmaceuticals, where differential temperatures are encountered overseas.
Insect an pest control a benefit
An air curtain supplying a high-velocity sheet of air across a door opening will prevent flies and other flying insects from entering a building. This is particularly important in restaurants and bars, and any premises where food is manufactured or served - where strict environmental health regulations apply. It is an extremely beneficial side effect as an air curtain is primarily employed for climate control yet units are also installed overseas for insect control alone.
The most effective air curtain design for insect control has a nozzle that can angle the air stream away from the area to be protected. An angle of about 20 from the vertical is usually optimal. The unit should meet or exceed UK Department of Agriculture and US Federal Drug Administration standards, which call for an air stream of 50 mm to 120 mm wide at the nozzle, capable of producing a minimum velocity of 8 m/s of air 1 m above the floor and across the entire door opening to ensure there are no gaps for the insects to enter.
Apart from flying insects, air-curtain manufacturers say rodents are also discouraged from entering a building. They claim that rats, mice and other furry intruders do not like the sensations of an air curtain on their fur and will avoid it!
Design and installation
The construction an design of the equipment that generates an air curtain is quite simple - a cross flow or axial fan, driven by a constant or variable speed electric motor contained in a simple enclosure with an air inlet and outlet, sized to produce a rate of flow to suit the opening and the velocity required to prevent heat transfer.
Off-the-shelf models are available from a number of suppliers and units are also custom made but, where wide entrances are involved that exceed the capacity of one fan unit, tow or more are stacked side by side (or on top of one another in the case of side mounting of very tall openings) and operated simultaneously, meaning that there is probably no limit to the size of the opening that can be accommodated.
By directing a jet of air either from top to bottom or horizontally across a doorway, this invisible 'barrier' reduces the rate of heat and moisture flow through the opening and, according to independent research conducted by the US-based Refrigerated Research Foundation and the University of Illinois, this can be as much as 60% to 80% in refrigerated facilities such as cold storage buildings, cold rooms and freezers.
These simple devices can be retrofitted or specified as part of the initial refrigeration or climate control design, reducing compressor running time or using a smaller capacity unit to achieve the same performance.
A variety of installation options are available to cater for building and architectural features such as suspended ceilings but the most common is simply bolting the unit to the wall above the doorway and connecting a single phase supply and switch to the unit.
Power consumption is negligible for a normal sized doorway opening - about 300 W. Some units can even be specified with a heating element to warm an enclosed area.
Air curtains block the flow
An air curtain simply creates a block in the air flow through an opening. The air velocity of the curtain must then be great enough to direct the resulting velocity downward and ensure that a small part of the air stream goes out while the main air flow comes back into the room.
For additional information please refer to http://www.nis-co.com/aircurtain/Index.html.
Oleg Tchetchel
Ventilation Systems Designer
Canadian Air Systems
http://www.nis-co.com
http://www.nis-co.com/airknife/Index.html
About the Author
Oleg Tchetchel
Designer of Air Moving Systems
Canadian Air Systems
http://nis-co.com/contact/Index.html
If you are looking for a different item here are a list of related products on Auto Mechanic Tools, please check out the following:
