Welcome to our website Auto Mechanic Tools. You will discover here the honest product assessment you have been looking for about Abrasive Sand. Also please show your appreciation below by clicking one of the social media buttons below for this website.
![]() BB1500XLD MEDIA CABINET ABRASIVE SAND BLASTER BLAST US $1,799.00
|
![]() BB-1600BVD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $2,599.00
|
![]() BB-1100BVD MEDIA ABRASIVE SAND BLAST BLASTING CABINET US $1,799.00
|
Abrasive Sand
3M Clean Sand Abrasive Disc
Copper Slag Sandblasting Abrasive Is Now Available In Convenient 75Lb Bags
These new 75lb bags are a great compromise between the 50 and 100lb packaging option, and have thus gained in popularity over the old packaging options. This is rather important due to the popularity and efficacy of copper slag abrasive.
Copper slag is the abrasive of choice when it comes to cutting speed, aggressiveness, and cost. CARB approved, listed on Naval QPL-22262, copper slag is environmentally friendly, and approved for recycling in Portland cement. This is the best abrasive to use when ranked on cutting speed and cost per sq. ft., according to independent NIOSH tests. Copper slag is a hard, cubical, and aggressive sandblasting media. It is also dense enough to be reclaimed via a Cyclone separator, having a density of 115 to 120#'s/cubic foot. In addition, copper slag is dense enough to be used with steel grit.
Facts:
- Copper slag is a hard, cubical, and aggressive sandblasting media.
- Recyclable: Dense enough to be reclaimed via a Cyclone separator: 115 to 120#'s/cubic foot.
- Listed on Naval QPL-22262
- Environmentally friendly.
- Approved for recycling in Portland cement.
- Best abrasive to use when ranked on cutting speed and cost per sq. ft., according to independent NIOSH tests.
- Both arsenic and lead testing is done to the material and is therefore on the United States Naval Qualified Products list.
- California Air Resources Board (CARB) approved for dry outdoor abrasive blasting
Aggregate Properties:
- Sand Equivalent: 91% (Extremely clean, with few contaminants such as ash, clay, etc.)
- LA Wear: 4% Loss (LA Wear test is a test where the material is tumbled 100 to 500 times, then measure for loss of particle size. A low number like 4% indicates a very good, low level of loss. This is a test that is not really applicable to the sandblasting applications, but does indicate how tough the material is.)
- Uncompacted Voids: 45.6% (Uncompacted Voids is a test that is irrelevant to sandblasting, it measures how well our material packs for roads.)
- Fractured Faces: 100% (Fractured faces means that we have 100 percent fractured material and not rounded, making our slag excellent for sandblasting.)
For additional information regarding packaging and pricing options, please visit our web site: http://sandblastingabrasives.com/copper-slags-37/
About the Author
Industrial Supply, Inc.
PO BOX 2560
Loveland, CO 80539-2560
970-461-8429 Phone; 970-372-4558 Skype; 970-692-2278 Fax
Email: info@sandblastingabrasives.com
Web: http://sandblastingabrasives.com
If you are looking for a different item here are a list of related products on Auto Mechanic Tools, please check out the following:



















































































